"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". Advertising Disclosure
BestChoice.guide ratings are based on a multitude of verified customer feedback and our attention is solely on products that we truly value. If you choose to click on the links to the products we mention, we could receive an affiliate commission, but this will not cause you any additional costs.
AUTOMATIC SUBMERSIBLE PUMP: ideal for sump systems; not recommended for general dewatering or emergency water removal
BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
BUILT-IN DIAPHRAGM SWITCH: pressure activated non-adjustable switch; on at 7 - 10"; off at 1 - 4"; NOT recommended for emergency water removal or general dewatering
AUTOMATIC SUBMERSIBLE PUMP: ideal for sump systems; not recommended for general dewatering or emergency water removal
BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
BUILT-IN DIAPHRAGM SWITCH: pressure activated non-adjustable switch; on at 7 - 10"; off at 1 - 4"; NOT recommended for emergency water removal or general dewatering
AUTOMATIC UTILITY PUMP: For submersible use only; comes with a piggyback diaphragm switch with 18' cord; 1-inch FNPT discharge and 3/4-inch garden hose adapter
SUBMERSIBLE PUMP: Typical applications for the 5-ASP-LL pump include commercial, industrial, and home uses where liquid must be transferred or recirculated; this pump is for submersible use only
BUILT TO LAST: epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated, oil-free, energy-efficient PSC motor with overload protection, triple-lip seal, upper and lower ball bearings
Portable and compact weighing 8 lbs. with built-in carry handle; piggyback switch allows easy conversion to a manual pump
SPECIFICATIONS: 1/6 HP, 1500 GPH, 115-Volt, 18' cord, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI, automatic operation - on at 2 to 3 inches; off at 0.5 - 1.5 inches
BUILT TO LAST: epoxy-coated cast iron cover, housing and volute; nitrile/carbon/ceramic mechanical shaft seal ; cold-rolled steel shaft and upper and lower ball bearings;
CONTINUOUS DUTY MOTOR: Features an energy-efficient 115-volt, 5 Amp, 600-Watt PSC (permanent split capacitor) motor and improved performance; standard 10-foot power cord
AUTOMATIC OPERATION: Snap-action float switch turns pump on when water reaches 8 to 11 inches and shuts pumps off when water drops to between 2 and 5 inches
SOLIDS HANDLING: clog-resistant impeller handles up to 1/2-inch semi solids suitable for light effluent waste
SPECIFICATIONS: 1/3 HP, 115-Volts, 5 Amps, 600 Watts, 60 Hz, 53 GPM at 5-foot lift; 28-ft shutoff; 12.1 PSI, 10-ft cord, integral snap-action float switch; polypropylene base
APPLICATIONS: compact system ideal for collecting and removing water from laundry trays/sinks, lavatories and wet bar sinks, dehumidifiers, air conditioners, water softeners and more
COMPACT SELF-CONTAINED PREASSEMBLED SUMP SYSTEM: includes 1/3 HP 2760 GPH automatic sump pump, 3.5 gallon polypropylene basin, piping, multiple adapters and O-rings
INTEGRAL (BUILT-IN) DIAPHRAGM SWITCH: automatically activates pump when water reaches 4 to 7 inches; pump shuts off when water falls between 1 and 3 inches
INCLUDES: two 1-1/2" MNPT x 2" slip adapters for inlet and discharge; one 2" MNPT x 1-1/2" slip adapter for vent; removal filter in cover; NOT INCLUDED: check valve, discharge pipe and union
MANUAL SUBMERSIBLE PUMP: ideal for sump pump systems with a separate switch (switch sold separately), emergency water removal or water transfer applications
BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
MULTIPLE FITTINGS: 1-1/2-inch FNPT discharge; 1-1/4-Inch FNPT adapter and 3/4-inch garden hose adapter included
BUILT TO LAST: Epoxy-coated cast iron housing, motor cover and volute and designed for continuous duty; polypropylene base won't stain floors if used for emergency water removal
HIGH EFFICIENCY MOTOR: Permanent Split Capacitor (PSC) motor runs on 6.5 Amps, 750 Watts and cCSAus listed; rated for continuous duty
SOLIDS HANDLING: handles semi-solids up to 1/2-inches in diameter suitable for light septic systems
AUTOMATIC OPERATION: Integrated snap-action float switch activates the pump when liquid reaches 8 to 11 inches and turns the pump off when liquid reaches 2 to 5 inches
SPECIFICATIONS: 115-Volt, 1/2 HP, delivers up to 4020 GPH at 5-ft. of head, 36-ft. shutoff, maximum 15.6 PSI, 10-ft. cord, integrated snap-action float switch
AUTOMATIC UNDER SINK OR LAUNDRY TUB SUBMERSIBLE PUMP: includes mid-level integral diaphragm switch (not adjustable); not recommended for traditional sump systems or general water transfer applications
BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
BUILT-IN MID-LEVEL PRESSURE-ACTIVATED DIAPHRAGM SWITCH: non-adjustable; activates when water reaches 4 - 7"; shuts off when water drops to 1-1/2" - 3-1/2"; pump must sit in water to activate switch
ENERGY EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor with thermal overload protection runs on 3.5 Amps, 350 Watts
AUTOMATIC OPERATION: Integrated snap-action float switch activates when water reaches 7 to 10 inches and turns off when water reaches 2 to 5 inches
FOR SUMP SYSTEMS OR EMERGENCY WATER TRANSFER: 1.5-inch FNPT discharge and 3/4-inch garden hose adapter allows this pump to be used for sump systems or for water removal/transfer applications
SOLIDS HANDLING: handles up to 3/8-inch semi solids
LIGHTWEIGHT DESIGN: epoxy-coated cast aluminum housing; thermoplastic vortex impeller, cover, and volute; carbon/ceramic nitrile shaft seal; for easier installation or mounted as a backup pump
ENERGY EFFICIENT MOTOR: oil-filled PSC (permanent split capacitor) motor; CSA listed in the USA and Canada; thermally protected; 8-ft. power cord
AUTOMATIC OPERATION: Piggy-back vertical float switch; on at 7.25 inches, off at 2.75 inches; can be by-passed for manual operation; small footprint - fits basins 14 inches or larger
SCREENED RAISED INTAKE: prevents pump from picking up debris from the basin floor that could cause clogging or damage
SPECIFICATIONS: 1/3 HP, 4.4 Amps, 460 Watts, 60 Hz, 48 GPM at 5-ft lift, 25-ft shut-off, maximum 10.8 PSI, 1.5" FNPT discharge, 8-ft cord, 95°F liquid temperature rating
