TOP PICKS
Bestseller No. 1
Rockville Atom 8W 8 Channel 3500 Watt Marine/Boat Amplifier Amp w/Bluetooth
- Rockville ATOM 8W 8 Channel 3500 Watt Peak / 880w Dyno-Certified RMS Marine/Boat Amplifier Amp w/Bluetooth
- Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!); Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc); 3500 Watts Peak System Power
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc); RMS Power Output at 4 Ohms: 70 Watts x 8 Channels
- RMS Power Output at 2 Ohms: 110 Watts x 8 Channels. RMS Bridged Power Output at 4 Ohms: 220 Watts x 4 Channels. Voltage display on amp; Configurable to 8, 6, or 4 channels
- Bluetooth Wireless with Auto Pairing. RCA Line Output. UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure; 80A Fuse rating; Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
Bestseller No. 2
Pyle Hydra Marine Amplifier - Upgraded Elite Series 1000 Watt 4 Channel Bridgeable Amp Tri-Mode Configurable, Waterproof, MOSFET Power Supply, GAIN Level Controls and RCA Stereo Input(PLMRA420)
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
Bestseller No. 3
Pyle Hydra Marine Amplifier - Upgraded Elite Series 400 Watt 4 Channel Audio Amplifier - Waterproof, 12 volt, Dual MOSFET Power Supply, GAIN Level Controls, RCA Stereo Input & LED Indicator (PLMRA400)
- PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA400 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and be universally compatible with a variety of head units
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 400 WATT: This amplifier is powerful with its 100 WATT x 4 max or 400 WATT and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 1-300mV and 4 or 8 Ohm speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use
Bestseller No. 4
Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
Bestseller No. 5
Pyle 6 Channel Marine Amplifier Receiver - Waterproof Wireless Bridgeable Audio Amp for Stereo Speaker with 2000 Watt Power Dual MOSFET Supply, GAIN Level, RCA Inputs and LED Indicator PLMRA620
- 6 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA620 is engineered as a 6 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
- WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with gold-plated stereo speaker output terminal connectors to combat weather corrosion with long-term us
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 2000 WATT: This amplifier receiver is powerful with its 2000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
Bestseller No. 6
NVX MVPA6 Marine-V Series 6-Channel Bridgeable Micro Class D Compact Car Amplifier (900W Total RMS) | IPX67 Waterproof Rating
- Powerful and Versatile Performance: The NVX MVPA6 Marine-V Series amplifier delivers 900W total RMS power, with 100W x 6 channels at 4 ohms and 150W x 6 channels at 2 ohms, making it perfect for a wide range of audio setups including cars, boats, and motorcycles.
- Unmatched Durability: Featuring an IPX67 waterproof rating and a conformal coated PCB, this amplifier is built to withstand harsh outdoor conditions, ensuring reliable performance in any environment, from marine to powersport applications.
- Compact and Efficient Design: With its ultra-mini size and Class-D Full Range topology, the NVX MVPA6 offers high efficiency and performance while being easy to install in tight spaces, making it an ideal choice for compact installations.
- Advanced Protection and Control: Equipped with short circuit, thermal, and voltage protection, along with top tune control access, multi-input AUX in & RCA, and a bass remote control knob, this amplifier provides both safety and easy customization of your audio experience.
- Superior Audio Quality: Enjoy crystal-clear sound with a frequency response of 20 Hz - 20 kHz, a low total harmonic distortion (THD) of 0.3%, and a high signal-to-noise ratio of 90 dB. The variable bass boost of up to +12 dB at 50 Hz lets you fine-tune your bass to perfection.
SaleBestseller No. 8 −15%
Pyle Hydra Marine Amplifier - Upgraded Elite Series 3000 Watt 8 Channel Bridgeable Amp Tri-Mode Configurable, Waterproof, MOSFET Power Supply, GAIN Level Controls and RCA Stereo Input (PLMRA830BT)
- 8 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA830BT is engineered as a 8 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters.
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level inputs.
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 3000 WATT: This amplifier is powerful with its 3000 WATT maximum and MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm speaker impedance.
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
Bestseller No. 9
Stinger Audio MT-600.4M 1000 Watt 4-Channel Marine Audio Amplifier
- Digital Class-D: Packs a powerful punch with high efficiency and an incredible small form factor.
- Small Footprint and Sturdy Design: Built to the highest standards for lasting reliability.
- Robust Unregulated Power Supplies: Designed to provide superior performance and unmatched efficiency.
- Designed with Advanced HEXFET Power MOSFET: Reduced on-resistance, faster switching speeds, and unparalleled reliability.
- Direct Insert Power and Speaker Terminals: Decreased resistance for higher power transfer and efficiency.
Bestseller No. 10
Pyle Hydra Marine Amplifier - Upgraded Elite Series 400 Watt 4 Channel Micro Amplifier - Waterproof, GAIN Level Controls, RCA Stereo Input, 3.5mm Jack, MP3 & Volume Control (PLMRMP3A)
- PREMIUM 4 CHANNEL AMPLIFIER: Engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units like MP3 and smartphone.
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. This also includes a 3.5mm-to-RCA adaptor so you can connect your device and a remote for volume control.
- SHORT PROTECTION: Has a built-in power protection circuitry and soft turn on/off. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 400 WATT: This amplifier is powerful with its 400 WATT maximum power supply. Comes with adjustable input GAIN level controls of 2 to 4 Ohm speak. It’s also waterproof
- WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions
BUYING GUIDE
Marine adventures are often enhanced with the right soundtrack, turning a casual boat outing into an unforgettable journey across the waves. Just like any sound system, the heart of marine audio is the amplifier, ensuring that your music is heard over the sound of the sea, the engine, and the wind. However, when choosing an amplifier for marine use, there are distinct factors to consider compared to standard amplifiers. Here’s a guide to ensure you pick the best marine amplifier for your water-bound escapades.
- Water and Salt Resistance: The marine environment is notorious for its moisture and salt, both of which can wreak havoc on electronics. Ensure your chosen amplifier is water-resistant or waterproof, and ideally resistant to salt corrosion.
- Power Output: This determines how loud your system can get. Consider the size of your boat and where you’ll be using it. Larger vessels or open-sea adventures may require more power to overcome ambient noise.
- Number of Channels: Decide on how many speakers or subwoofers you plan to install. A four-channel amplifier, for instance, can power up four speakers or two speakers and a subwoofer.
- Size and Installation: Marine amplifiers are typically compact to fit into tight spaces on boats. Before buying, measure the space where you plan to install it, and check the amplifier’s dimensions.
- Heat Dispersion: The marine environment can get hot, especially under direct sunlight. Opt for amplifiers with good heat dispersion capabilities or built-in cooling systems to prevent overheating.
- Signal-to-Noise Ratio (SNR): A higher SNR indicates less background noise. For clear sound without much interference, aim for an amplifier with a high SNR.
- Input Options: Ensure the amplifier can connect to various audio sources, be it a traditional stereo, a modern Bluetooth device, or even satellite radio.
- Peak vs. RMS Power: While peak power indicates the maximum power an amplifier can produce, RMS (Root Mean Square) power gives a more accurate representation of the amplifier’s continuous power output. Always consider RMS power when evaluating an amplifier’s capabilities.
- Built-in Crossovers: Crossovers direct specific frequency ranges to appropriate speakers, enhancing sound clarity. Some marine amplifiers come with built-in crossovers, allowing for more precise sound customization.
- Price and Warranty: Quality marine amplifiers come in a range of prices. Determine your budget but keep in mind that you often get what you pay for. Also, ensure your amplifier comes with a decent warranty, reflecting the manufacturer’s trust in its durability.
- Brand Reputation: Stick to well-known brands in the marine audio industry. These companies tend to have more experience creating products tailored for the marine environment.
- Customer Reviews: Before making a purchase, read reviews from other boat owners. This provides insight into real-world performance and potential issues.
Adding an amplifier to your boat’s sound system can drastically improve audio quality, making your time on the water even more enjoyable. By considering the factors listed above and conducting thorough research, you can confidently select the best marine amplifier that meets your needs and stands up to the marine environment. Sail on with stellar sound!